any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft?s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all sanyo products described or contained herein. pnp/npn epitaxial planar silicon transistor driver applications ordering number:enn2158a 2sb1229/2SD1835 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan d1003tn (kt)/92098ha (kt)/4107ki/0296at, ts no.2158?1/5 r e t e m a r a pl o b m y ss n o i t i d n o cs g n i t a rt i n u e g a t l o v e s a b - o t - r o t c e l l o cv o b c 0 6 ) ? (v e g a t l o v r e t t i m e - o t - r o t c e l l o cv o e c 0 5 ) ? (v e g a t l o v e s a b - o t - r e t t i m ev o b e 6 ) ? (v t n e r r u c r o t c e l l o ci c 2 ) ? (a ) e s l u p ( t n e r r u c r o t c e l l o ci p c 3 ) ? (a n o i t a p i s s i d r o t c e l l o cp c 5 7 . 0w e r u t a r e p m e t n o i t c n u jj t 0 5 1 e r u t a r e p m e t e g a r o t sg t s t 0 5 1 + o t 5 5 ? ( ) : 2sb1229 specifications absolute maximum ratings at ta = 25 ? c package dimensions unit:mm 2003b [2sb1229/2SD1835] applications voltage regulators, relay drivers, lamp drivers, electrical equipment. features adoption of fbet, mbit processes. large current capacity. low collector-to-emitter saturation voltage. fast switching time. ? c ? c electrical characteristics at ta = 25 ? c 1 : emitter 2 : collector 3 : base sanyo : np r e t e m a r a pl o b m y ss n o i t i d n o c s g n i t a r t i n u n i mp y tx a m t n e r r u c f f o t u c r o t c e l l o ci o b c v b c i , v 0 5 ) ? ( = e 0 =0 0 1 ) ? (a n t n e r r u c f f o t u c r e t t i m ei o b e v b e i , v 4 ) ? ( = c 0 =0 0 1 ) ? (a n n i a g t n e r r u c c d h e f 1v e c i , v 2 ) ? ( = c a m 0 0 1 ) ? ( =* 0 0 1* 0 6 5 h e f 2v e c i , v 2 ) ? ( = c a 5 . 1 ) ? ( =0 4 t c u d o r p h t d i w d n a b - n i a gf t v e c i , v 0 1 ) ? ( = c a m 0 5 ) ? ( =0 5 1z h m e c n a t i c a p a c t u p t u oc b o v b c z h m 1 = f , v 0 1 ) ? ( =) 2 2 ( 2 1f p e g a t l o v n o i t a r u t a s r e t t i m e - o t - r o t c e l l o cv ) t a s ( e c i c i , a 1 ) ? ( = b a m 0 5 ) ? ( = 5 1 . 04 . 0v ) 3 . 0 ? () 7 . 0 ? (v 5.0 4.0 0.5 0.6 2.0 14.0 5.0 0 .45 0 .45 4.0 0.4 4 1.3 1.3 123 continued on next page.
2sb1229/2SD1835 no.2158?2/5 r e t e m a r a pl o b m y ss n o i t i d n o c s g n i t a r t i n u n i mp y tx a m e g a t l o v n o i t a r u t a s r e t t i m e - o t - e s a bv ) t a s ( e b i c i , a 1 ) ? ( = b a m 0 5 ) ? ( =9 . 0 ) ? (2 . 1 ) ? (v e g a t l o v n w o d k a e r b e s a b - o t - r o t c e l l o cv o b c ) r b ( i c i , a 0 1 ) ? ( = e 0 =0 6 ) ? (v e g a t l o v n w o d k a e r b r e t t i m e - o t - r o t c e l l o cv o e c ) r b ( i c r , a m 1 ) ? ( = e b = 0 5 ) ? (v e g a t l o v n w o d k a e r b e s a b - o t - r e t t i m ev o b e ) r b ( i e i , a 0 1 ) ? ( = c 0 =6 ) ? (v e m i t n o - n r u tt n o t i u c r i c t s e t d e i f i c e p s e e s) 0 6 ( 0 6s n e m i t e g a r o t st g t s t i u c r i c t s e t d e i f i c e p s e e s 0 5 5s n ) 0 5 4 (s n e m i t l l a ft f t i u c r i c t s e t d e i f i c e p s e e s 0 3s n 0 3s n switching time test circuit * : the 2sb1229/2SD1835 are classified by 100ma h fe as follows : k n a rrstu h e f 0 0 2 o t 0 0 10 8 2 o t 0 4 10 0 4 o t 0 0 20 6 5 o t 0 8 2 continued from preceding page. v r r b v cc v be = --5v + + 50 input output r l 100 f 470 f i b1 i b2 i c =10i b1 = --10i b2 =500ma, v cc =25v (for pnp, the polarity is reversed.) itr09360 i c -- v ce 0 --0.4 --0.8 --1.2 --1.6 --2.0 --2.4 0 -- 0 . 4 -- 0 . 8 -- 1 . 2 -- 1 . 6 -- 2 . 0 -- 2 . 4 i b =0 -- 20ma itr09361 i c -- v ce 0 0.4 0.8 1.2 1.6 2.0 2.4 0 0.4 0.8 1.2 1.6 2.0 2.4 i b =0 2sb1229 50ma 25ma 40ma 2SD1835 15ma 8ma itr09362 i c -- v ce 0--4 --2 --6 --8 --10 --12 0 --200 --400 --600 --800 --1000 --1200 i b =0 -- 7ma -- 6ma -- 5ma -- 4ma -- 3ma -- 2ma -- 1ma itr09363 i c -- v ce 04 28 612 10 0 200 400 600 800 1000 1200 i b =0 2sb1229 7ma 5ma 4ma 3ma 2ma 1ma 6ma 2SD1835 -- 50ma -- 10ma -- 8ma -- 6ma -- 4ma -- 2ma 4ma 2ma collector current, i c ?a collector-to-emitter voltage, v ce ?v collector current, i c ?a collector-to-emitter voltage, v ce ?v collector current, i c ?ma collector-to-emitter voltage, v ce ?v collector current, i c ?ma collector-to-emitter voltage, v ce ?v
2sb1229/2SD1835 no.2158?3/5 itr09366 h fe -- i c --0.01 3 23 57 7 -- 0 . 1 -- 1 . 0 5 72 3 2 7 100 1000 5 3 2 7 5 3 2 itr09367 h fe -- i c 0.01 3 23 5 0.1 1.0 5 777 23 2 7 100 1000 5 3 2 7 5 3 2 2sb1229 v ce = -- 2v 2SD1835 v ce =2v 2SD1835 v ce =10v -- 1.0 -- 10 2 23 3 57 -- 100 57 10 7 100 5 7 5 3 2 2 itr09370 cob -- v cb 1.0 10 2 23 3 57 100 57 10 7 100 5 7 5 3 2 itr09371 cob -- v cb itr09364 i c -- v be 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 0 -- 0 . 8 -- 0 . 4 -- 1 . 2 -- 2 . 4 -- 2 . 0 -- 1 . 6 2sb1229 v ce = -- 2v itr09365 i c -- v be 0 0.2 0.4 0.6 0.8 1.0 1.2 0 0.4 0.8 1.2 1.6 2.0 2.4 2SD1835 v ce =2v ta=75 c 25 c --25 c ta=75 c 25 c --25 c 3 -- 1 0 7 --100 5 237 --1000 5 23 2 7 100 5 2 10 2 3 7 1000 5 3 f t -- i c 2sb1229 v ce =10v 2sb1229 f= 1mhz 2SD1835 f= 1mhz itr09368 3 10 7 100 5 237 1000 5 23 2 7 100 5 2 10 2 3 7 1000 5 3 f t -- i c itr09369 ta=75 c 25 c --25 c ta=75 c 25 c --25 c collector current, i c ?a base-to-emitter voltage, v be ?v collector current, i c ?a base-to-emitter voltage, v be ?v dc current gain, h fe collector current, i c ?a dc current gain, h fe collector current, i c ?a 3 collector current, i c ?ma gain-bandwidth product, f t ? mhz collector current, i c ?ma gain-bandwidth product, f t ? mhz output capacitance, cob -- pf collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector-to-base voltage, v cb -- v
2sb1229/2SD1835 no.2158?4/5 0 20 40 60 80 100 120 140 160 0 200 400 800 750 1000 600 p c -- ta itr09377 2sb1229 / 2SD1835 itr09372 v ce (sat) -- i c 57 77 -- 0 . 1 2 --0.01 23 35 -- 1 . 0 23 -- 1 0 -- 1 0 0 5 7 7 3 --1000 5 3 2 2 5 3 2 itr09375 v be (sat) -- i c 5 77 7 0.1 2 0.01 23 5 1.0 323 1.0 5 7 7 3 2 10 5 3 itr09373 v ce (sat) -- i c 5 0.1 2 0.01 23 357 7 7 1.0 23 100 1000 5 3 5 3 3 5 7 7 2 10 2 2 itr09374 v be (sat) -- i c 5 77 7 -- 0 . 1 2 --0.01 23 5 -- 1 . 0 323 -- 1 . 0 5 7 3 2 -- 1 0 5 7 3 itr09376 a s o 1.0 3 5 5 5 7 7 7 2 2 3 2 2 3 3 557 7 7 3 5 10 100 0.1 5 3 2 1.0 0.01 2sb1229 i c / i b = 20 2SD1835 i c / i b = 20 2SD1835 i c / i b = 20 10ms 1ms i cp =3a i c =2a dc operation 100ms 2sb1229 / 2SD1835 ta=75 c 25 c --25 c 2sb1229 i c / i b = 20 ta= --25 c 25 c 75 c ta= --25 c 25 c 75 c ta=75 c 25 c --25 c ta=25 c single pulse (for pnp, minus sign is omitted.) collector-to-emitter saturation voltage, v ce (sat)?mv collector current, i c ? a collector current, i c ?a collector-to-emitter saturation voltage, v ce (sat)?mv base-to-emitter saturation voltage, v be (sat)?v collector current, i c ?a base-to-emitter saturation voltage, v be (sat)?v collector current, i c ?a collector-to-emitter voltage, v ce ?v collector current, i c ?a collector dissipation, p c ?mw ambient temperature, ta ? ? c
specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2003. specifications and information herein are subject to change without notice. 2sb1229/2SD1835 ps no.2158?5/5
|
